To make the off-table bevel process better suited for plasma cutting, Hypertherm offers a torch alignment guide and V-bevel process charts for Powermax65®/85/105/125 or MAXPRO200® systems.
Hypertherm teach tools for SmartSYNC®, Duramax® and Duramax Hyamp™ robotic torches assist with programming robots before cutting. The torch teach tools enable system operators to program the robot’s cutting path, while visually verifying the torch will not touch the workpiece while cutting.
Protect your Powermax plasma system against oil in compressed air to maximize consumable life and system performance.
The Powermax® EtherCAT® Interface is an all-in-one adapter that allows a digital connection between the Powermax equipment and the EDGE® Connect CNC. This allows faster equipment setup, an intuitive operator interface, and access to real-time diagnostics information.
The cartridge adapter lets you convert to Hypertherm’s new cartridge consumable platform if you have a Powermax45® XP with a Duramax® Lock torch or a Powermax65®, Powermax85®, or Powermax105® with a Duramax torch.
The versatile and easy-to-use plasma bevel cutting guide is designed to cut a precise beveled edge for perfect weld preparation.
Cut skeletons faster and easier with the new Hypertherm torch sled for the Duramax® Hyamp™ Long torch. This new guide allows the torch to glide smoothly over the face of the skeleton and is also useful for scrapping.
The Hyamp™ torch adapter kit makes the 44 mm (1-3/4") machine torches (on the Powermax125® and MAXPRO200® systems) compatible with track burners, pipe cutters, cutting tables, and legacy equipment that accept a 35 mm (1-3/8") barrel torch.
The Hypertherm cartridge reader provides a simple process for reviewing data stored in Hypertherm cartridges. Data analysis helps customers understand cartridge utilization and identify operator training opportunities.
The robotic torch clamp kit is designed to simplify integration of Powermax® robotic torches on robots. The clamp fits perfectly with the torch dimensions and securely holds the torch during cutting applications.
The ohmic contact ring clips onto the mechanized cartridge, and connects it via electrical wire to torch height controls (THCs) that support the use of ohmic contact to find the surface of the workpiece before each cut.
Hypertherm air filtration kits protect Powermax systems against contaminated air and moisture from air lines.
The Hypertherm leather torch sheath provides additional protection for torch leads against cuts, burn-through and abrasion.
The Hypertherm remote trigger pendant has a remote on/off control for a machine torch.
Hypertherm system dust covers are made from a flame-retardant vinyl designed to protect your Powermax plasma cutting system from dust and dirt.
Hypertherm offers a variety of work cables with a choice of ring terminals, c-clips, hand clamps, and magnets to suit individual preferences.
Hypertherm hard carry case for protecting and storing the Powermax30 or 30 XP plasma cutting systems and accessories.
The Hypertherm gear bag carries spare torches, work cables, and accessories.
Hypertherm shoulder strap for Powermax30 XP, Powermax30 AIR, Powermax45, and Powermax45 XP plasma cutting systems.
The Hypertherm gouging heat shield provides additional protection when gouging.
Plasma circle cutting guides cut circles up to 28" in diameter.
Plasma angle cutting guide is designed for accurate hand cuts of angles and square edges.
Magnetic straight edge is designed for accurate hand cuts of straight edges.
This set of 2 magnetic blocks is designed for holding templates and straight edges for easy and accurate plasma hand cutting..
Hypertherm pocket-sized measuring tape holder with level.
Clear face shield with flip-up shades is designed for grinding metal and other metal cutting.